Видео

Where can I get, I really want it so bad!

Are the 5mm RGB brighter than a UCS2903 strip? Im working on the front of my vehicles lighting next where depth isnt much of a concern, and curious about building my front drl/turn signal strip with 5mm. Ill take any extra brightness i can get there, front turn signal is an important one!!😊 Thanks as always..

Kit link?

Nice guys! I made some during Covid. ruclips.net/video/IAmvLH1zHWk/видео.htmlsi=JSCpOoLakr7X5tiZ

Hi there, very good video. I have a situation. I bought Sanvi biled laser projectors 3". The projector has 5 wires, 2+ and 2-, for the low and high beams. I guess the fifth wire (yellow) is for the laser, but, when I join that one with the high beams, the projector turns off and restart. I am testing the projectors with a 14v laptop adapter, could it be the reason of not getting the laser beam? Or does the wire need diode? The projectors uses canbus because of my car (Hyundai Elantra i35 2013). But, another situation is, when a I connect the canbus, nothing work even the projector, and when I connect laptop adapter directly I can see the low beam and the hight beam, less the laser because of the fifth wire. Any guidance or information will be welcome, thank in advance.

I like to instead add a relay kit to change from switched ground to switched positive. Use the wires from your original plugs high and low to activate the relay and give you full power straight from your battery. Plus it takes all the load off your factory switch

Awesome Where do I get those led tube stripes please?

I ordered it back in February

How long do these take to get when u buy them

Dude that's awesome. Can't wait to see the next update

Hi sir thumbnail maker

You were at wicked big meet? 😮 I would have gone just to meet you but I worked on my car instead! 🤦

I've got the exact trailer, minus the removable fender. Mine didn't come with that option. I was using small jack stands in the back near the dovetail similar to ypur idea, but recently bought two of those harbor freight weld on trailer jacks and installed them on the dovetail sides. They really work well to stop the dovetail from dipping with a heavy load. I have not had the ramps come out as you described, and I think with the jacks, I won't ever see that happen. I have two of those stake pocket D rings, but just bought 4 of the weld on kind, and will be placing them on the sides of the frame in front of and behind the wheels for added attachment points. I really like this trailer. I put water seal on the wood twice a year to protect the floor.

Permanent outdoor lights can be synced by creating a group.

🤝 your led strip for my door handles still good and bright 🥰

check the email

I tryed that on a car that has projector low beam and a reflector high beam. When i installed bi led projector high beam works only if low beam is on so i used 10A10 diode so the high beam can work when low beam is off but diode is getting VERY hot.

Very cool! How much does this kind of work cost?

Hey, great execution and awesome idea. I have been searching for weeks for this exact outcome. I too have this card and the embedded lights are trash. Question, once I cut the strip to length what is the connection to add wire to the cut-off piece so I can use the rest of the strip?

Do you think it should be possible to add a timer? How?

Do you guys sell the retrofit brackets by themselves?

i’ve got 4 of the screw in type breathers on my retrofit now plus the two that came on the housing. going to give these a try as i’m still getting some condensation on the lens of one of my headlights

ok I need help... I am doing this install in a 2013 OB w/ HK system, and the CANBUS harness, but can't for the life of me get the amp to power on. What is the amp power wire in the harness? How do you get 12v to it?

I wish your transition music was a little louder. I can still hear out of my left ear

Would 18 Gauge wire work fine if Im powering 360 ws2812b 5050 Led's?

Are these weather proof as they are? Could I just use them without a housing?

It's 2.4 not 2.5 wifi

Thanks, this is thw video that I needed. I thought about using diodes but didn't know which ones to use.

Can't get to work correctly the Hi-Lo function.

Nice, can this hole metal part with the attachment to the motor be bought completely or how is it build. 🤔

No response to anyone. What gives

how do you separate the park/brake/turn/rev segments/areas when running addressable leds? do you require multiple controllers/sequencers?

The actual video starts at 8:08...

If you are placing it on your soffit you will find the light will sometimes land at a groove. Just place a fastener on both sides of the light. Keep the wire straight and it will look much clearer.

I just installed my Govee lights. THEY ARE AWESOME. I will say if you live in Florida like me, you will need to use the anchors. I snapped a chock line and it made installation easier NOT FASTER.

хуйня какаето, Phanteks NV7 Premium DRGB Kit - Black лучше

Love these please keep making them

Been having a hard time finding honest and informative videos dealing with the different breather options. I've had a terrible time with depo headlights on my BMW since the day I got them. The first time it collected so much water that there was literally about an inch of standing water in them. I've cracked and resealed numerous times. This last time lasted a while but I'm starting to see light condensation again but I'm starting to think it may be more related to warmer weather then rain/washing. I need to try these because even removing the headlight is a pain.

Can You make sharingan eyes?

Is it possible to achieve the galaxy effect without having even amount of LEDS in each row?

I have a k1 that I bought on a huge sale a while back. I was ok with having to fiddle with it a bit though. I leveled the bed with shims, swapped out the plate for a pei one, installed the camera, and rooted it. I am running full Klipper with all the options now and it is by far my best printer. I have 4 printers in all and don't touch my other 3 now. I have over 1000 hours on my k1 with 0 issues and only replaced the nozzle. I love this thing and the K1C is just a better version in my opinion. I would not upgrade mind you as there are not enough changes but I would buy one if I didn't have a k1. I will say the competition is fierce now though. With the flashforge 5m and the qidi Q1 pro out there.

Are there any other brand of module can be used to give the same function

Bought some tail lights that came wired with a blueghozt 2.0 that I hooked up to my battery. I want to wire them to a switch through that external input. Is it just power wire from external input to switch then power wire from switch to battery? Don’t have the most experience wiring but I want to be able to toggle a show mode without having to open the app every time.

Great video but what is the difference between Sugon A9 anf Aifen A9 pro? Is there any difference at all?

Where can i buy these? Im really frickin' mad now. I cannot find these projector headlights with multi color and function anywhere online....... I have got to get these immediately.

Driveway parking only. Nice looking truck. Wish mine had the longer bed. There’s a new business venture 5.5 =6.+.

I like the door handles, I cannot lie. :)

Looks like shit

How different of a hookup is it if the system has power switches?

How can I buy from you